LED light specifications:
1. Power source: 220V/AC~240V/AC; 100V/AC~130V/AC
2. Power frequency: 50/60Hz
3. Installation: Indoors, ceiling mounting
4. HF: 5.8GHz CW radar, ISM band
5. Detecting angle: 360°
6. Detection range: 2-10m(radii), (adjustable)
7. Time setting: 8sec to 12min
8. Ambient Light: <10~2000LUX
9. Transmission power: <2mw
10. Standby power: <0.9W
Lamp part
1. LED quantity: 80PCSx0.2W
2. Power consumption: 16W
3. IP: 54
KA-HF-15D Introduction:
This is a microwave sensor switches controlled LED lights,the microwave sensor was built into the
lamp ,it has 96pcs high brightness LEDs inside ,with total power of 15 watts.which can generate
almost the same brightness when compared to 150 watts incandescent lamp,the microwave
sensor switch is a new type automatic switch that comes after voice switch ,and infrared sensor
switch .The detection way has the below advantages compared with other as follows: 1.
non-contact detection, 2. Suitable for bad environment, immune to temperature, humidity, noise,
air, dust, light3.RF interference ability, 4. Transmission power only 0.2 mW, It will not harm the
human body. Simple installation+ easy wiring.
We adopt this sensitive advanced sensor switchs in lighting control, enabling the light to turn on
automatically when one comes , automatically turn off when one goes out In addition to the widely
usage in the aisle stairs ,living room and bedrooms , it also can be installed in the bathroom.
The built-in microwave sensor switch can penetrate plastic, glass, wood . So it can be installed in
glass or plastic shell lamp This allows the application of microwave sensor switch in different
styles of lights for energy control. Now, we can provide a variety of microwave sensor LED lamps
KA-HF-15D Detection Information:
){kind=link}
){kind=link}