Product Description
KA-TSE-28 10A Europe India Indian Weekly Programmable Electronic Timer Switch Digital Timer Specification:
1. Power:220-240V 50Hz
2. Load Max 10A.Max.2300W
3. Number of programs:16(20)times
4. Min in setting time: 1minte
5. Accuracy:±1min/Mon
6. Battery:Ni-Mh 1.2V
7. Shell material:PC
8. Operating temperature:0-40ºC
9. Suitable for India socket, Europe socket
Function details:
Initial operation
1.Plug the timer into a regular 220-240 volt hourshold power point and turn the power on
2.Leave for approximately 12 hours to charge the memory back up batteries
Setting current time
1.Press the CLOCK button and hold ,simultaneously press the week button until the actual day is displayed Continue by pressing HOUR or MINUT button until the current hour or minute is displayed.when setting the buttons week.hour or minute can be held down for rapid forward counting
2.Release both buttons,the week and time will be set
3.To reset incorrect time.repeat previous steps
Setting programs
1.Press the timer button and release.the first on setting can be mad now
2.Press week button to set the day or blocks of days.set the time by pressing the hour button and then minute button .
3.Press the timer button again to finish the first on setting and enter into the first off setting ,by repeating 2 to make the first setting
4.Press the timer button again to finish the first off setting and enter into the 2 on setting repeat 2 and 3 to program remaining settings
5.After completing setting ,press the clock button and the timer is ready to operate.
Example: timer on at 18:15 and timer off at 22:15 everday
a.press timer and lcd displays 1_on
b.press week till lcd displays "mo, tu,we,th, fr,sa,su"
c.press hour till lcd displays"6:00pm or 18:00
d.press minute till LCD displays"6:15pm or 18:15
e.press timer again and lcd dispays 1_off
f.repeat the above c and d till LCD dispays 10:15pm 0r 22:15
g.press the button"res/rcl"to stop some programs,press the button"res/rcl"again to recall the selective programs
TIP:when verifying your programs ensure that the settings do not overlap,especially when using the block option.
ON/AUTO/ OFF SETTING
1.Press ON/AUTO/OFF button to ON: the socket has power output
2.Press ON/AUTO/OFF button to off:the socket no power output.
3.Press ON/AUTO/OFF button turn to AUTO.timer will run by setup program
KA-TSE-28 Actual photos:
Audited Supplier 
){kind=link}
){kind=link}