KA-SLH09 E27 PIR Sensor Lamp Holder Socket specifications:
1) Power source: 110V/AC-130V/AC; 220V/AC-240V/AC
2) Power frequency: 50/60Hz
3) Rated load: 60W Max. 110-130V/AC&220-240V/AC
600W Max. 220-240V/AC
300W Max. 110-130V/AC
4) Time setting: Incandescent mode
Delay time: 10S~12min half bright state: 3min
Delay time: 30S~2h half bright state: 10min
Fluorescent mode delay time: 10S~12min(adjustable)
5) Detection range: 6-8m
6) Light-control: 10~2000LUX(adjustable)
7) Detection angle: 120° /100°
8) Applicable mounting: Ceiling/wall
9) Installation height: 2.5~3.5m/1.5~3m(wall)
10) Working temperature: -10° C~40° C
11) Working temperature: <93%RH
12) Detection speed: 0.6 ~1.5m/s
13) Lamp socket type: E27(Standard)
14) Suitable for incandescent lamp, fluorescent lamp and LED lamp
KA-SLH09 introduction:
1) The product is a PIR sensor and intelligent light, utilizes the infrared energy from human as control-signal source and determine the light to need to work or not, and control the light on and off automatically.
2) When one enters the detection filed and trigger the sensor to work, the light turns on; When one leaves the detection filed and the setting time reaches, the light will turn off.
3) It can detect the ambient light illumination automatically and set and adjust the value according to the fact need. Such as, the light will turn on and works when the ambient light illumination is under setting value. Once it exceeds the setting value, the light will stop working.
4) The light will be on until the time-delay comes when the sensor is triggered. Once detected the constant signal, the time will be overlaid and the light will be on constantly.
5) Standard lamp holder isE27, E26 lamp holder can be customized. Rated load and type refer to the specifications, the saving-energy light is recommended.
6) It can be installed in indoor, corridor and public-building.
KA-SLH09 Dimension:
KA-SLH09 Detection Information:
KA-SLH09 Actual photos:
Audited Supplier 
){kind=link}