KA-DP40B IP65 Waterproof Ceiling Mount Warehouse Microwave Sensor specification:
1. Working voltage:AC120-277V;
2. Power frenquency: 50/60Hz
3. HF System:5.8GHz CW radar,ISM band
4. Detection Angle: 360°
5. Detection Range: 1-15m max.
6. Installation height: 4-15m max.
7. Hold time:Sensor:10s/30s/1min/5min/8min/10min/20min/30min
8. Remote control: 10s/30s/1min/5min/8min/10min/20min/30min
9. Stand-by DIM level: 0%/10%/30%/50%
10. Stand-by period: Sensor:0s/1min/3min/10min/30min/+24hours
11. Remote control: 0s/10s/1min/3min/5min/10min/30min/+24hours 12. Transmission Power:<10Mw
13. Rated Load: 2000W(incandescent), 1000W (LED)
14. Ambient Light: 5lux/10lux/20lux/30lux/50lux/100lux/200lux/24H
15. Waterproof grade:IP65
KA-DP40B introduction:
The microwave sensors is according to the microwave doppler effect, it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area. The Detection way has the below advantages compared with other as follows: 1. Non-contact Detection, 2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light^3. RF interference ability, 4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring. We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: - 15 ~ + 70 Celsius degrees.
NOTE: The high-frequency output of this sensor is <0.2mW- that is just one 100 of the transmission power of a mobile phone or the output of a microwave oven.
KA-DP40B Dimension:
KA-DP40B Wiring diagram:
KA-DP40B remote controller function:
Audited Supplier 
){kind=link}