KA-S03R RF Remote control PIR sensor specifications:
1) Power source: 220-240V/AC,50Hz ;100-130V/AC,60Hz
2) Rated load: 1200W Max.tungsten (220-240V/AC)
300W Max.fluorescent (220-240V/AC)
600W Max.tungsten (100-130V/AC)
150W Max.fluorescent (100-130V/AC)
3) Time setting: 10sec~12min
4) Light-control: 10LUX~2000LUX
5) Detection range: 3-10m (radii.)
6) Detection angle: 360º (ceiling installation)
7) Installation height: 2.5~3.5m
8) Working temperature: -10°C~+40°C
9) Power consumption: working 0.45W(static 0.1W)
10) Sense motion speed: 0.6~1.5m/s
KA-S03R Remote Control Function:
AUTO="AUTO"mode, enable the sensor to detect
ON= Always on, about six hours later turn to "AUTO"mode
OFF= Always off, about six hours later turn to "AUTO"mode
1) LUX:When luminance is less than 10 LUX, enable the
light to power on, for the use at night. When luminance
is less than 50 LUX, enable the light to power on, for the
use when ambient luminance is not enough. When
luminance is more than 1000 LUX, enable the light to
power on, for the use when it is in the daytime.
2) TIME: Adjust time setting of load work.The time setting
is about 8s when turn in to 8s.The time setting is about
12min when turn in to 12min.
3) SENS: Detection range: two meters; it is an approximate value which will change according to detection
object's size.Detection range: six meters; it is an approximate value which will change according to
detection object's size.Detection range: maximum; it is an approximate value which will change according
to detection object's size.
KA-S03R Actual photo:
Audited Supplier 
){kind=link}